LINPOR工艺（德国 林德公司），流化床反应器（Captor, Linpor, Ringlace）的一种，采用填料填的一种生物固定化技术，本人也在搜索此方面的资料，愿意一起来查找和了解！

LINPOR工艺及其在大连春柳河污水处理厂中

本人最近也在寻找linpor的资料，据说它的出水NH3-N可以达到1ppm，请各位高手不吝赐教。

找到一点资料，算是抛砖引玉吧，请各位高手赐教

我正在做一个新项目，业主想采用，我一直在一直同他们联系

谢谢，刚好有一个污水处理厂进行改造

不知道这个工艺怎么样，但是我觉得氨氮1ppm有点不太现实啊

这俄国工艺本网站有该公司的工艺宣传手册，处理效果还可以，主要问题是填料是类似于海绵的物质，运行两三年后填料就需要更换，成本太高了。

我们现在有一项成熟的技术，可以快速提升现有活性污泥系统的能力（COD和氨氮）和稳定性, 可用于1B到1A的改造。该技术安装和维护可以在不停车的情况下进行。有愿意合作，请电邮到wastewater@live.cn,留下公司名称和联系方式。


The Apex System, added to existing activated sludge systems, increases the effective Mixed Liquor Suspended Solids (MLSS) inventory of the system without increasing solids loading to the clarifier. This economical, easy-to-install system upgrades a wastewater treatment facility without increasing tankage. The Apex system requires no additional maintenance and installs with little or no disruption to plant operations.

Increased Capacity

The flexible, high-surface-area media is submerged in the activated sludge tanks to provide extensive surface area for biomass growth. The attached biomass population can increase the effective MLSS concentration by over 3000-4000 mg/l, increasing organic load capacity. This also reduces F/M ratios, improving process control and stability

Higher MLSS Without Higher Clarifier Solids Loading

Because a significant portion of the active biomass remains attached to the Apex rather than suspended in the mixed liquor, organic removal increases without overloading secondary clarifiers with higher solids loads. For activated sludge systems with clarifier solids loading problems, treatment performance can be maintained or even improved while reducing MLSS loading to the secondary clarifier.

Resistant to Organic and Hydraulic Shock Loads

An “Achilles Heel” of activated sludge technology is the potential for peak hydraulic surges to “wash out” the suspended biomass from the aeration basins. With Apex, a significant amount of biomass is fixed in place and is available to treat the incoming organic load that accompanies hydraulic surges

Enhanced Nitrification

The biomass living on the Apex media increases MCRT (Sludge Age), promoting nitrification. During cold weather and where lower compliance limits are imposed, the added biomass improves the performance of nitrifying plants, or even allows non-nitrifying plants to nitrify.

Active Media Surface

Apex media has a tensile strength in excess of 1000 lbs. per lineal foot, yet is flexible enough to move like “reeds in a stream.” This movement creates localized turbulence that constantly renews surface areas and promotes oxygen transfer.

The total surface area available for biomass attachment at startup is up to 800 sq. ft. per cubic foot of installed media module. However, dry surface area does not tell the whole story. From those 800 sq. ft. of attachment points, the biomass grows underwater in 3 dimensions, creating flexible “branches” of non-blinding active surface area that can be measured in pounds per cubic foot, while still allowing for free flow of oxygenated wastewater through the media.

Economical

By improving wastewater treatment without adding aeration tankage or clarifiers, the Apex System is a low-cost solution to upgrading activated sludge plants.

Easy to Install

The entire Apex system can be installed without dewatering the aeration basin or modifying the aeration diffusers. The custom-sized/constructed Apex modules are lowered into the aeration basin with a crane and supported by the tank walls or on legs above the tank floor.

Durable and Long-Lasting

Apex is designed for durability and long life under the harsh conditions of an activated sludge aeration tank. The Apex media uses high-strength polyester. Even if a strand is cut or broken, the fabric will not fray or unravel.