12楼
相当不错，感谢．
回复
13楼
Program: SAP IV
Title: Static and Dynamic Response of Linear Systems
Developer: K-J. Bathe, E.L. Wilson and F. E. Peterson,
Department of Civil Engineering, University of California,
Berkeley 1973
Modified: B.F. Maison, Structural Engineer, El Cerrito, California 1992.
Category: Structural
Platform: CDC,Scope,FTN4 (60 bit single precision);
IBM,VM/CMS,Fort4H (double precision);
VM/CMS Fujitsu VP;
PC DOS, Lahey F77L-EM32 Fortran
Reference: Bathe, K.-J., E.L. Wilson, and F.E. Peterson,
"SAP IV-Structural Analysis Program for Static and Dynamic
Response of Linear Systems," Earthquake Engineering Research
Center, Report No. UCB/EERC-73/11, University of California,
Berkeley, June 1973, revised April 1974.
Maison, B.F., "PC-SAP4 -- A Computer Program for Linear Structural
Analysis," August 1994.
Summary: SAP IV is a finite element structural analysis program for
the static and dynamic response of linear three-dimensional systems.
The program is written to analyze structures which are idealized by
combinations of structural element types. The capacity of the problem
depends mainly on the number of finite element nodal points in the system.
There is practically no restriction on the number of elements, the number
of load cases and the number or bandwidth of the equations to be solved.
In a dynamic analysis the options are: (1) frequency calculations,
(2) frequency calculations followed by response history analysis, (3) frequency
calculations followed by response spectrum analysis and (4) response history
analysis using step-by-step direct integration. Despite large system capacity,
no loss in efficiency is encountered in solving smaller problems. The report
describes the logical construction of the program, the dynamic high speed
storage allocation, the analysis capabilities, the finite element library and
the numerical techniques used.
The following element types are available: Three-dimensional truss, Three-
dimensional beam, Plane stress and plane strain quadrilateral, Two-
dimensional axisymmetric solid, Three-dimensional solid (8 node brick),
Plate and shell quadrilateral, Boundary element, Three-dimensional straight
or curved pipe element, Variable number of nodes thick shell and 3-D element.
Comment: No sample inputs or outputs are available for the HP version.
==================================================
thank you ! good stuff !
回复
14楼
好东西，不过没时间学了啊
回复
15楼
相当不错，感谢．
回复
16楼
正需要这方面的东东，如果能从中学到一二也很不错，非常感谢你的提供，希望我能看的懂了，呵呵
回复
17楼
习之，用之
谢谢楼主
回复
18楼
我怎么不能下载呀！！！
回复
19楼
大师经典，谢谢，可以借鉴
回复
20楼
经典:lol :lol
回复
21楼
谢谢分享！！！！！！
回复
