自定义线型如下：*给水,给水 ----G----G----G----G----G--A,3,-.25,["G",STANDARD,S=0.25,R=0.0,X=-0.08,Y=-0.125],-.25我想修改自定义线型，请问第二行中的，3，-.25以及STANDARD,S=0.25,R=0.0,X=-0.08,Y=-0.125],-.25各参数各表示什么含义，请详细说明一下好吗，谢谢。
自定义线型如下：
*给水,给水 ----G----G----G----G----G--
A,3,-.25,["G",STANDARD,S=0.25,R=0.0,X=-0.08,Y=-0.125],-.25
我想修改自定义线型，
请问第二行中的，3，-.25以及STANDARD,S=0.25,R=0.0,X=-0.08,Y=-0.125],-.25各参数各表示什么含义，请详细说明一下好吗，谢谢。
2楼
你分别对每个参数进行修改，观察一下相应的线型变化就可以得到答案，这个操作并不复杂，我采取这种方式自定义了很多线型。
回复
3楼
自定义线型如下：
下笔走长度3，抬笔走长度0.25，写文字G，使用字形为STANDARD，文字插入点坐标X=-0.08,Y=-0.125，抬笔走长度0.25
回复
4楼
Each linetype is defined on two lines in a LIN file. The first line defines the linetype name and provides for an optional description.
*linetype-name [, description]
This line must begin with an asterisk and must be immediately followed by the linetype name. If the description is provided, it must be separated from the name by a comma and no longer than 47 characters. The description is not used by AutoCAD; it is intended to help you visualize the appearance of the linetype.
The second line is the code that describes the actual pattern.
alignment,patdesc-1,patdesc-2, ...
This line begins with the alignment code (currently only A is allowed), followed by a comma-delimited list of pattern descriptors (no spaces are allowed).
When you create a linetype, it is not loaded into your drawing automatically. Use the Load option of theLINETYPE command.
回复
