Current sense transformer ratio 1:500 Have to able to sense currents under normal conditions that means max. 500A. Under this max. requirements the current sense transformer must give correct signals. The burden that is used at the end of the current sense transformer is 18 Ohm. The current sense transformer case dimensions are nearly l*b*h of 49,5mm*49,5mm*27,5mm. The sense hole is nearly 19mm. The output of the transformer is with two fast terminal with 6,3mm*0,8mm and nearly 32mm centre to centre between each terminal. This CT have 500 windings with 0,40mm wire to a nearly OD*ID*HT (40mm*30mm*16mm) silicon steel core.
Current sense transformer ratio 1:500 Have to able to sense currents under normal conditions that means max. 500A. Under this max. requirements the current sense transformer must give correct signals. The burden that is used at the end of the current sense transformer is 18 Ohm. The current sense transformer case dimensions are nearly l*b*h of 49,5mm*49,5mm*27,5mm. The sense hole is nearly 19mm. The output of the transformer is with two fast terminal with 6,3mm*0,8mm and nearly 32mm centre to centre between each terminal. This CT have 500 windings with 0,40mm wire to a nearly OD*ID*HT (40mm*30mm*16mm) silicon steel core.
2楼
这么长啊
回复
3楼
该电流传感器变比为1:500 ，即在基准正常情况下（1？）测得值为500A。 为了使电流传感器示值精确。 在被使用电流传感器末端的负载最大为18 欧姆。 电流传感器盒三维参数约为l*b*h（长，宽，高）49,5mm*49,5mm*27,5mm 。 传感器穿孔约19mm （直径？）。 传感器的输出是以二倍常速的6,3mm*0,8mm终端和各个终端集中在32mm终端中心。 这CT由500匝0,40平方毫米导线绕在一个OD*ID*HT (40mm*30mm*16mm) 硅钢核心上构成。
翻译的水准不够，不知道意思对吗？
希望多多指点
回复
4楼
3楼兄弟,啊!真是好强啊!
小弟佩服!!
回复
5楼
我若遇上困难也希望三楼的高手帮忙!
回复
6楼
哈哈，楼主不会整段都有问题吧，里面哪些句有问题？
回复
7楼
基本没问题，可以得85分
回复
